AIRSHIELD
-15-
Hold the fan by the sides only, do not
push or apply any pressure to the fan
blades.
Fan-Motor Unit
■
Remove the main filter and battery
pack/packs.
■
Disconnect fan-motor unit plug from socket
(flip-up locking pin on connector male and pull
apart socket). Withdraw the fan-motor unit
from retaining grommet.
■
Replacement of the fan-motor unit is the
reverse. Of the above procedure (note fan
orientation). Fitting will be made easier with
the visor removed and with the use of a water
based lubricant such as liquid soap. Apply a
small amount of lubricant around the inside of
the retaining grommet before insertion of the
fan. Carry out a functional test.
Visor
■
Disengage tab from centre of visor and lower
the flap. Carefully press the sides of the visor
and lift it from the visor frame.
■
Flex replacement visor and insert the top and
sides into the visor frame ensuring that the
top visor tabs slide outside of the frame.
Swing the bottom of the visor into place, lift
the flap and engage the latch through the
visor centre hole.
IMPORTANT!
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste.
Accessories and packaging should be sorted for
environmental-friendly recycling.
Separate collection. This product must
not be disposed of with normal
household waste.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by retailer
when you purchase a new product.
Please call Trend Technical Support 01923
224681 for advice as to how to dispose of
unwanted Trend electrical product in an
environmentally safe way.
MANU-AIR v5.0 16/5/05 11:24 am Page 15
