Trend Micro™ Network VirusWall™ Enforcer 2500 Administrator’s Guide
5
-
26
Will changing the Network VirusWall Enforcer 2500 IP address
prevent it from communicating with the Control Manager server?
Yes, changing the Network VirusWall Enforcer 2500 IP address through the
Preconfiguration console Device Settings menu will temporary disconnect the
Network VirusWall Enforcer 2500
Can I perform extensive Network VirusWall Enforcer 2500
configuration settings locally through the Network VirusWall
Enforcer 2500 front panel?
No, you cannot perform extensive configuration settings using the device itself.
The Network VirusWall Enforcer 2500 front panel interface only allows you to
configure the
Device Settings
, view System Information and hardware logs, reset the
device, and turn on the UID LED. In addition, the back panel interface has a serial
port that allows you to complete the preconfiguration tasks.
To perform extensive configuration changes, use the Web console.
See
for a comparison of the available Network VirusWall Enforcer 2500
management tools.
How can I back up the Network VirusWall Enforcer 2500
configuration before modifying the firmware?
Use the Preconfiguration console
System Tasks
>
Export Configuration File
option to back up the Network VirusWall Enforcer 2500 configuration. In addition,
the Preconfiguration console
System Tasks
>
Import Configuration File
option
allows you to import settings from an identical Network VirusWall Enforcer 2500
devices.
You can also perform this procedure from the Network VirusWall Enforcer 2500 Web
console from
Administration > Backup Configuration
.
Why is it that I cannot find any preconfiguration information in the
Administrator’s Guide?
This Administrator’s Guide includes instructions and details that you will need when
configuring and administering a device from the available management tools. For
preconfiguration instructions, please refer to the printed or PDF
Getting Started
Guide
.