TPS Hardware Specification and Installation
24
After you run the setup, you can further configure your system using subsequent setup commands through the device CLI.
See the
TPS Command Line Interface Reference
for detailed command descriptions.
1.
Specify a security level (None, Low, Medium, or High). The security level you select determines your password
complexity requirements.
2.
Create an administrative account with the
SuperUser
role. The
SuperUser
role gives the account full access to the
device. For more information about user accounts, review the documentation for your product.
The wizard prompts you to log in with your administrative account so that you can continue initial setup.
3.
From the console port terminal, log in with your administrative account.
The wizard prompts you to configure IP address, default gateway, DNS server, and timekeeping options.
Install your license package
Install your license package on the device to provide the following product capabilities:
•
Inspection throughput
•
Digital Vaccine (DV)
•
Threat Digital Vaccine (ThreatDV)
•
SSL inspection
You can install the license package using the SMS or LSM. For information about how to install the license package, refer to
the user guide for whichever interface you use.
Update your license package to assign a product capability that you have purchased, such as an inspection throughput license,
to a particular security device. To review and manage the capabilities in your license package, go to the TippingPoint License
Manager on the
.
Verify your product license provides sufficient inspection throughput. By default, a TPS security device is unlicensed and
provides reduced inspection throughput for testing and evaluation purposes only.
S
ecurity
device
U
nlicensed
inspection
throughput
8400TX
1 Gbps
8200TX
1 Gpbs
2200T
200 Mbps
440T
100 Mbps
Attach network connections
Attach your network cables to network segments on the device where appropriate.
Where to go next
After you attach network connections, network traffic passes through the device using the default filter configuration. The
default configuration automatically recognizes and blocks traffic that is known to be malicious at all times, under all
conditions, in all network environments.
Содержание TPS 2200T
Страница 1: ......
