Trelawny TCG 250, Руководство по эксплуатации и обслуживанию

Страница: 16 / 28

PAGE 16
TCG250 Floor Grinder
troubleshooting
Troubleshooting Cause Action
Engine stops suddenly or does
not run correctly
No fuel in the fuel tank. Refuel fuel tank. (see safety section)
Spark plug faulty. Replace spark plug.
Fuel blockage. Check fuel line and strainer.
Air filter partially blocked. Replace air cleaner element.
Low oil level. (Engine cut off switch is fitted) Rectify leaks and replenish oil.
Motor stops suddenly or does not
run correctly
Loose wiring, incorrect voltage or blown fuse Check connections and power supply or replace fuse.
Engine/motor runs but the grinding
heads do not move.
Drive belts slack or failed. Replace belt or adjust tension
Centrifugal clutch faulty on engine versions. Replace clutch assembly
No grinding blocks fitted.
Check grinding discs for any damage, replace if necessary.
Fit new grinding blocks
Grinder is slow or erratic
Loose or a failed drive belts. Adjust drive belt, or replace.
Surface too rough.
Use Trelawny TFP200/250 Surface Planer to produce a
smoother surface or to remove bulk of material prior to
grinding. Change grinding blocks to a coarser grade.
Engine will not start
No fuel in the fuel tank Refuel fuel tank, see safety precautions.
Low oil level Rectify oil leaks and replenish oil.
Water in fuel Drain fuel tank, float chamber, and refuel.
Incorrect fuel in tank, i.e. diesel in petrol tank
Clean out fuel tank, all fuel lines and carburettor float
chamber. Refuel with correct fuel.
Spark plug faulty Replace spark plug.
Motor will not start
Power supply is not switched on, blown fuse,
voltage incorrect, loose wiring, or faulty motor.
Confirm that the power supply is switched on.
Rectify loose wiring, replace blown fuse or replace motor.
Use above information in conjunction with the Honda Operation and Maintenance Manual.
If problem has not been cured by any of the above actions, contact your local Trelawny SPT dealership for assistance.
All rights reserved. Any unauthorised use or copying of the contents or part thereof is prohibited.
This applies to trademarks, model denominations, part numbers and drawings.
Use only genuine Trelawny spares. E & O E
The use of non-Trelawny spare parts invalidates the warranty.