TrekStor MovieStation maxi t.uc, Руководство пользователя

Страница: 33 / 256

EN 33
3) Even if you have correctly connected the MovieStation, it is possible that it may be in
the incorrect video mode. To select different modes, press the " TV OuT " button until the
picture is correctly presented on your television. Please be patient during the search for
the correct video mode.
I have adjusted the settings of the MovieStation in " S
yStem
" or " S
ettingS
" and would
like to restore the factory defaults.
As described in the " C
ONFiguRATiON OF THe
T
ReK
s
TOR
M
OVie
s
TATiON
" section, execute the menu item
" F
ACTORY seTuP
". The MovieStation will thereby be set to the delivery state. The saved files are not
deleted when you do this.
While using the MovieStation, it no longer responds to my entries.
i
This problem may have several causes. Please check the following items:
1) Please aim the remote control in the direction of the MovieStation so that direct visual
contact between these two devices exists and ensure that the infrared receiver of the
remote control or the MovieStation is not covered.
2) Check the batteries in the remote control and, if necessary, replace them with new ones.
I would like to display picture files with the MovieStation. Some files take a very long
time to load.
i
Depending on the resolution, the pictures have varying file sizes. The larger the picture, the
longer the image display takes.
Reduce the pictures with your photo processing program to a resolution of approx. 800 x 600 pixels.
Some picture files that I previously copied to the MovieStation are not listed in the
folder navigation.
You can only display picture files in JPEG format (*.jpg or *.jpeg files) with the MovieStation.
Files of other file types are not listed in the folder navigation.
I start a video file, but no correct picture or no correct sound is played.
Please note that only video files in the following formats can be played: MPEG-1 (VCD),
MPEG-2 (SVCD/KVCD), DVD (VOB), DivX3 (up to 720 x 400), DivX5 (up to 720 x 400), Xvid
i
If you encounter problems while playing your video files, please check the utilized audio and
video formats. You may, for example, use the free software GSpot (http://gspot.headbands.com/).
In the folder navigation, it takes a very long time until the contents of a folder are
displayed.
Every time you open a folder, its entire contents are analyzed in the directory. As a result, it
takes a longer time to open a folder with many files as it does a folder with a few files. We
recommend that you sort your files in subfolders. On the one hand, the loading times of the
folders are reduced; on the other hand, this simplifies the overview and retrieval of particular
contents.
copying from the memory card lasts a long time.
When the
§
button is pressed, the copying of the entire memory card content onto your
MovieStation is started. This may take some time in the case of memory cards that contain a
lot of files.
The started copying procedure can be canceled by pressing the
μ
button. Please observe,
however, that the incompletely copied file might not be able to be executed.