EN
19
Power connection
•
Connect your SatReceiver only to a power supply system, which is located within the
specifications of 100-240 V AC, 50/60 Hz.
Protection of your satreceiver
•
If there is a thunderstorm, the SatReceiver should be switched off and the mains plug as
well as the antenna cable should be pulled off.
a
Please make sure that both the satellite antenna and the LNB are connected with the building's
lightning protection or another suitable grounding.
•
During longer absence (e. g. while being on holidays), disconnect as a precaution the
SatReceiver from the net and your antenna system.
Maintenance
•
Never open the housing of your SatReceiver. Otherwise there is the danger of an
electric shock.
•
Repairs during the warranty period may be carried out only by the TrekStor service team.
•
Please store the original packaging for safe transportation of your SatReceiver.
avoiding "Burn-In"
i
A long presentation of standing pictures (e. g. a test pattern) can damage your TV permanently.
Plasma screens, rear projection television and CRT TVs are especially susceptible for that.
Therefore please avoid presenting standing pictures for a longer time period on such devices.
1) Controls and connections of the HD SatReceiver Luna S2 PVR
1.1)Controls on the front side
A
B
C
D
F
E
8888
A) Display: Shows you the number of the current station or further information while
operating the device.
B) Infrared receiver: Receives the signals of the remote control.
C) USB Service Port: Is located on the front side of the SatReceiver and will be needed e. g.
for firmware updates.
D) Operating mode display: Shows the current operating mode of the SatReceiver. The light
shines green while operating and red in the standby mode.
E) Program change button: With these buttons you can switch to the next respective the
previous channel of the current channel list.
F) Standby button: Switches between operation and standy mode.
Содержание Luna S2 PVR
Страница 1: ...DE EN HD SatReceiver Luna S2 PVR ...
