Page
7
of
35
Unpacking
All Trekinetic wheelchairs ship directly from our facility in the UK. Whilst all
containers are shipped securely, there can be some subtle differences depending
on shipping location and wheelchair configuration.
1.
Place the box on the floor with the wooden pallet at the base as per the
picture above.
2.
Carefully cut the 4 metal straps and remove the lid.
3.
Set aside the protection plates on top and remove the upper packaging
material
4.
Slide the central cardboard sleeve upwards, trying not to tear it as it can
be reused if you ever need to ship the entire chair back to us.
5.
If the chair has been delivered outside the UK and you can see the
wooden frame inside, use a screwdriver (not supplied) to undo the
screws in each of the four legs at the base. If not, skip to step 7.
6.
Lift up and set aside the wooden structure with the wheel attached.
7.
Cut the white cable ties to free the wheels and remove them along with
the rest of the packaging
8.
Cut the three white cable ties attaching the main body to the base.
9.
Set the main body of the K2 on the floor and move the packaging out of
the way.
Assembly
1.
Typically, all the wheels will be removed during transit and look like the
below picture, but in certain situations the wheels may be left on. If that
is the case, please just skip the relevant wheel assembly section(s). Please
note the below picture shows extended handlebars and cable operated
assistant brakes that may not have been selected as an option on your
model.
