Page
29
of
35
Dimensions folded.
Body with wheels removed: approx. 920 x 450 X 560 mm
Wheels: approx. 640 diameter X 100mm thick each
Basic chair with wheels complete: approx. 14.5 kg (excludes any extras or XL
model)
Body with wheels removed: approx. 8.5kg
Wheels: approx. 3.0 kg each
6.
Maintenance
Your Trekinetic K2 needs to be regularly maintained to stay in good working
order. Below is a short guide with some tips on how to maintain your K2.
General
Trekinetic recommend that you check the tyre pressures at weekly intervals.
Check all nuts and bolts for tightness every 4 weeks and use only metric
hexagonal keys in good condition. Ensure that keys are inserted fully and do not
over tighten (see torque settings below). Any locking nylon insert nuts must be
replaced with new, if removed. If you are not sure, please contact your dealer or
contact us directly if you don’t have a local dealer.
Use only mild household cleansers and do not use spirit or solvents that could
attack the Carbon Fibre. Use only a damp cloth for cleaning the upholstery and
remove it for drying. The same applies to the chair, should it get wet.
Perform these operations on a non-slip surface and apply the brakes
Torque settings
M4 screws 2.6 Nm
M5 screws 5.1 Nm
