Trek Fusion C, Руководство пользователя

Страница: 11 / 18

E.11
Fig. 20
3-5 mm
9. Attach the cadence
magnet to the left crankarm,
aligning the magnet with the
cadence sensor (Fig. 20). The
magnet should have 3-5 mm
clearance from the sensor. If
the sensor and magnet are too
close, or touching, rotate the sensor unit away
from the magnet until adequate clearance is
achieved.
10. Once correct orientation is achieved, tighten
the sensor attachment quick ties and tighten the
magnet. Trim excess quick tie length with a scissors.
Install the Sensor Wiring
11. Route the cadence wire up the underside
of the downtube (Fig. 21) and back of the head
tube, and secure with the provided adhesive strips.
Route the wire from the head tube to the han-
dlebar, leaving slack to accom-
modate movement between the
handlebar and head tube.
Fig. 21