ENGLISH
ENGLISH
10
11
3.
Arrange the A end of the Y cable and the Range Boost
Battery cable in the forward end of the motor housing
(behind the internal battery rear mount).
4.
Remove the S hook.
5.
Rotate the motor up into the motor housing.
Pro Builder Tips:
a.
As you rotate the motor up, wiggle the Range Boost
Battery cable on top and the motor power plug in
the rear for ease of motor re-installation.
b.
Make sure no cables are pinched when moving the
motor into place.
6.
Install the four forward motor mount bolts.
7.
Use the IP40 Torx Plus wrench and torque all forward and
aft motor mount bolts to the manufacturer’s spec.
8.
Put the grommet around the battery cable.
9.
Put as much cable inside the motor housing as possible.
10.
Install the grommet into the hole on top of the motor
housing.
11.
Reconnect the motor power plug back on to the motor.
