2023 Fuel EX
14
Adjust the geometry — seatstay mino link
Tools
•
4mm and 6mm hex tools
•
Torque wrench with 4mm and 6mm bits
•
Small clean towel or cloth
1. Remove the rear wheel.
2. Place a small clean towel or cloth over the down tube to
protect the paint.
3. Remove the upper shock mount hardware. Use the
6mm hex tool to remove the bolts.
4. Lower the shock and rest it on the towel or cloth cover
-
ing the down tube.
5. Rotate the rocker pivot forward to pull the mino links
into the window in front of the seat tube.
6. Use a 4mm hex tool to turn the screw in the mino link
to flip the link to either the slacker or steeper position.
Repeat this process with the other mino link.
Slacker
Steeper
4
7. Torque the screws to 8Nm.
8. Re-install the upper shock hardware and torque the
bolts to 8Nm.
Содержание 2023 FUEL EX
Страница 1: ...2023 FUEL EX SERVICE MANUAL...