Instruction manual OPTIMAL VP150-VP320 (0911)
trejonindustries.se
14
8 Service
and
maintenance
ENSURE THAT THE ENGINE IS TURNED OFF WHEN
PERFORMING MAINTENANCE
8.1 General
maintenance
Check the screw joints every week.
Check the hydraulic hoses and hydraulic couplings at least once a week. If the components are
worn or cracked, they need to be replaced.
The hydraulic cylinder packing should only be changed by qualified personnel from the tractor
distributor network.
8.2 Lubrication
The lubricant nipples, 10 pieces, should be lubricated once or twice during the season. Use NLGI
2 oil with high EP characteristics.
8.3 Scraper
steels
Turn the scraper steels before they start wearing out the plough's chassis. In order to turn the
outer scraper steels, shift right and left. Replace scraper steels when they are worn out.
Be careful not to get caught between the scraper steels and the ground when
replacing the scraper steels.
8.4 Long term storage
Lubricate all lubricant nipples (10 pieces) with consistent grease.
The skid shoes should be lubricated with spray oil.
Check all hoses, couplings and screw joints for wear and cracks. Replace damaged components.
Place the end caps on the hydraulic couplings.