Trejon 120H-HY, Инструкция по эксплуатации и техническому обслуживанию

Страница: 21 / 32

Instructions for Use and Maintenance 120H-HY – 190H-HY (0901)
4 Service and maintenance
Warning!
Always turn off the engine and wait until the machine has completely stopped before
performing any kind of service or maintenance on the machine. Remove the ignition key
from the ignition switch.
Relieve the pressure before operating the implement. Let the machine cool down
if warm.
Never use the tractor’s lifting scoop alone. Secure the implement with jack stands or
similar devices in order to avoid falling. Always use protective glasses, gloves etc.
when performing maintenance.
Do not use your fingers when examining little openings. This is to avoid accidents.
Keep work area clear of other persons in order to avoid injuries.
4.1 General
Carefully maintain the equipment in order to achieve cost effectiveness and a long working life,
prevent early repairs and keeping the value of the equipment. Use only quality lubricants and
suitable tools. Do not use high pressure cleaning for the bearings and the hydraulic
components. After cleaning the equipment, lubricate it according to the lubrication chart, and
give it a brief test run.
Use the table below for the correct torque settings for the screws and bolts of the equipment.
Table 1 - Torque settings
Class 8.8 Class 10.9
Diameter
Nm lb.ft. Nm lb.ft.
M8
M10
M12
M14
M16
M18
M20
25
50
90
140
215
295
420
18
37
66
103
155
217
302
35
70
125
200
305
420
590
26
52
92
148
225
309
438
When a locking nut is used, increase torque by 5%.
trejonindustries.se 21