Sub- Assemblies
STEP:
The first thing we need to do is find the inner and outer
seam of the slide part. The inner seam will be on the inside of the
curve and the outer seam will be on the outside of the curve. Then
we are going to line the bottom seam up with the hole in the bot
-
tom center of the panel and the top seam to the top center hole of
the panel. Then using the SHK-3 (3/8” x 1 1/4” Carriage Bolts), the
SHK-1 (3/8” USS Flatwashers), and the SHK-5 (3/8” Nylon Lock
-
nuts) we lag down Slide Component-1 to the Slide Panel. Then our
1st sub assembly will be done and we can set it to the side for now.
Parts Needed
SC-1- Slide Component-1-
(1)
SC-7- Slide Panel-
(1)
SLB-1- 20” Spiral Slide Brace-
(2)
SLB-2- 30” Spiral Slide Brace-
(2)
SLB-3- 24” (L) Spiral Slide Leg- (1)
SLB-4- (R) 24” Spiral Slide Leg-
(1)
SLB-5- (R) 32” Spiral Slide Leg- (1)
SLB-60 (L) Spiral Slide Leg-
(1)
Inner Seam
Outer Seam
SC-1
SC-7
SHK-3
SHK-1
SHK-5
Hardware Needed
SHK-3- 3/8” x 1 1/4” Carriage Bolt-
(12)
SHB-2- 3/8” USS Flatwasher-(16)
SHK-5- 3/8” Nylon Locknut-
(12)
SHK-1- 3/8” USS FLatwasher-(12)
SHB-7- 3/8” x 3 1/2” Hex Lag Bolt-
(16)
SLB-3
SLB-1
SLB-1
SLB-2
SLB-2
SLB-4
SLB-5
SLB-6
3“ Gap
SHB-7
SHB-1
