Tredy TD-2600, Инструкция по эксплуатации

Страница: 8 / 10

Please find solutions from the following table list in case of any problem during operation.
If faults still occur after all measures have been exhausted, contact your supplier or distributor.
Technical Parameters
6
4. Troubleshooting
Model
Name of product
TD-2600
Top Filling Humidifier
Power Supply 1 20V ~ 6 0 H z
Rated Power 25 W
5L Volume
Max Mist Output 260ml/h
Max Working Time 16H
Applicable Area 21-30㎡
Spec L280*W180*H310mm
Net Weight 1.8KG
Faults Symptom/Possible Causes Solutions
Housing has no water
Mist has odor
Leakage from base drain holes
The blue light is on, but little or
no fog is released
Mist emerges from the area
between tank cover and tank,
and the area between tank
and housing
Damp on the window and wall
around the humidifier.
Float Paddle is stuck by
extraneous matter and cannot
turn down
Dirt in the housing or water is not
clean in the tank
Knob position at the minimum
position
Frequently lifting up the water
tank could cause a higher water
level of the housing, and the
vaporizer will possibly not nebulize
If the water level is over than the
Max. Level.
The water level in the housing is
higher than the air outlet
Water tank outlet spring failure
leaking
Over higher humidity position
Too close to window or door
Tank cover and tank doesn’t
put right or tank and housing
doesn’t put right
Put them right
Lower down the humidity position
Move humidifier farer away from window
or wall
Clean up the extraneous matter at the
pivot of the float paddle.
Clean housing and tank
Move Knob to higher position
Pour out some of the water from the
housing until the water level is under max.
Lower the water level in the housing
Replace the tank spring