15
4.1
Fill in water
Open the lid, fill the water tank with the desired amount of water and then close the lid. Note: the
water level must be less than the Max level.
Tips: Suggest to use clean water in the appliance
4.2
Obtain desired water
Make sure the plug is connected to the proper wall outlet, and fill in the water with the desired amount.
Place your cup on the removable water drip tray and make sure it aligns with the spout. First select the
desired temperature, and press the switch to the ON position, the desired water will flow out
continuously from the water spout, when you obtain the desired water, press the Switch to OFF position,
the appliance will stop working at once. If you want to obtain water again, only repeat the above
procedure.
Remarks:
--Do not touch the boiled water and steam in order to protect against burn wounds
--The appliance has a reset thermostat to recover the heating function when this is not working good,
you can reset the thermostat by the reset key delivered at the manual. Turn this key clockwise in the
reset hole and the temperature will be set.
