Unpack all parts and check the scope of supply for completeness (see section "Scope of Supply"); also
check for transport damage. If you find any damage to the components, do not use them (!), but contact
our customer service department (see section "Customer Service").
Assembling the appliance
1.
Insert the handle into the body. Line up the button on the handle with the
hole in the body. The handle will snap and lock into place.
2.
Insert the body into the floor head. Line up the holes.
3.
Insert the small screw and fasten.
Use
Caution!
•
Use the scent additives only in combination with water and never undiluted in the water reservoir!
•
Before using the appliance always check the floor cloth for wear. Do not use it if it shows any signs of
wear or if it is damaged! It could damage your flooring!
•
During cleaning, make sure the floor cloth is firmly attached to the cleaning foot to prevent damage
to the appliance or flooring.
•
Never clean the same spot for longer than 10 seconds.
•
Never direct the steam at people, animals, or items containing electrical components (such as inside
ovens, fridges, at switches and lights, microwave ovens etc.).
•
Never touch the bottom of the appliance during operation!
•
Caution! The cleaning foot may not be held in a slanted manner or else hot spray water will emerge!
•
After use, the floor cloth may still be very hot. If you want to remove it, wait until it has cooled down
and the appliance is no longer emitting steam.
