8
3
• Make sure all adapter plate holes align with drilled holes in concrete.
• Insert (4) expansion bolts into countersunk holes on adapter plate and tighten using hexagon wrench.
Note:
• Concrete should be at least 6” thick (8” for rooftop applications).
• Align rotating hub holes with adapter plate holes.
• Insert (5) hub bolts and tighten using hexagon wrench to secure.
Note:
• Rotating hub, hub bolts/washers and hexagon wrench are included with umbrella.
• Slide frame over the newly mounted rotating hub.
• See your umbrella instruction manual for further assistance.
REMOVAL:
• To remove your umbrella for seasonal storage or to move it to another adapter plate or in-ground fitting, simply
undo the hub bolts and remove umbrella from the adapter plate.
STEP
2
BOLT ADAPTER PLATE
STEP
3
BOLT ROTATING HUB TO ADAPTER PLATE
STEP
4
ATTACH UMBRELLA
Adapter Plate
Expansion
Bolts
(included with
umbrella)
(included with
umbrella)
AKZP/AKZ/AG25T
Rotating Hub
Hub Bolts
& Washers
STEP
6
ATTACH UMBRELLA
• Align rotating hub holes with adapter plate holes.
• Insert (5) hub bolts and tighten using hexagon wrench to secure.
Note: Rotating hub, hub bolts/washers and hexagon wrench are included with umbrella.
• Slide frame over the newly mounted rotating hub. See your umbrella instruction manual for further assistance.
REMOVAL:
• To remove your umbrella for seasonal storage or to move it to another adapter plate or in-ground fitting, simply
undo the hub bolts and remove umbrella from the adapter plate.
• Refasten the deck boards to the joists by attaching removed screws from Step 2 into the original holes closest
to the base plate.
• Two structural deck screws should be used on either side of the base plate in each board.
STEP
5
ATTACH ROTATING HUB
STEP
4
FASTEN DECK BOARDS
STEP
3
ATTACH BASE & ADAPTER PLATES TO DECK BOARDS
• Using four (4) countersunk bolts, attach the base plate and adapter plate together, with the base plate under
the deck and the adapter plate on top of the deck boards. Note: If deck is thicker, longer bolts may be required.
Your licensed contractor can help determine appropriate size bolts.
• Insert the (4) countersunk downward through the top of the countersunk holes on adapter plate, through the
boards, and screw them into the threaded holes in the bottom base plate.
• Tighten all (4) countersunk bolts with supplied hexagon wrench.
AKZP/AKZ/AG25T
Rotating Hub
Hub Bolts
& Washers
(included with
umbrella)
(included with
umbrella)
Adapter
Plate
Base Plate
Countersunk
Bolts
Adapter
Plate
Base Plate
