Large
Hexagon
Wrench
Large
Hexagon
Wrench
4
7
(Fig. 11)
(Fig. 24)
(Fig. 25)
(Fig. 26)
To OPERATE the 360° Rotating Hub Swivel:
Place your foot on the base pedal of the rotating hub and push to release rotating lock
(Fig. 24). Place one hand on the main frame and one hand on the tilt lever (Fig. 25),
swivel the umbrella frame in either direction until desired position is reached (Fig. 26). Step
off the base pedal to engage rotating lock and lock position (you will hear the pedal click, as
it reaches the next available lock position).
(Fig. 10)
S T E P 2
Umbrella Assembly
NOTE: Two-persons recommended for team lift and the rest of the assembly.
Remove rotating hub from the main frame by removing the (2) main frame bolts (Fig. 10),
set aside bolts for later use. Now, place rotating hub into mounting plate (Fig. 11) and tighten
with supplied (5) washers & (5) hub bolts (Fig. 12). Assemble main frame onto hub and
lower carefully (Fig. 13). Insert the two bolts on bottom portion of main frame and tighten
using large hexagon wrench provided (Fig. 13).
DO NOT OVER-TIGHTEN.
Locate the
crank lift handle and install onto the mid-area of the main frame. Use the small hexagon
wrench provided to lock in the small screw (Fig. 14).
REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO
OPENING UMBRELLA.
AKZ/AKZSQ Features
(Fig. 12)
(Fig. 13)
(Fig. 14)
