Limited Warranty
What does this warranty cover?
Treasure Products warrants that its products are free
from defects in material and workmanship under
normal use for a period of one (1) year from the date
of purchase. Warranty extends only to original
purchaser and is not transferable.
What is not covered by this warranty?
This warranty does not cover any accessories, or any
consumables, as to which there shall be no warranty
or replacement. This warranty does not cover
conditions or damages caused by accidents,
alterations or misuse. In addition, damage due to
normal wear and tear is not covered by this warranty.
What is needed to keep the warranty in service?
You must provide proof of purchase as a condition of
receiving warranty service. Your dated sales receipt,
showing the date of purchase of your product is your
proof of the purchase date.
What will be done to correct the problem?
Treasure Products will repair or replace, at Treasure
Products’
sole
discretion,
any
defective,
nonconforming, or malfunctioning product or any
component thereof.
How do you get service?
If you require warranty service, contact Treasure
Products prior to sending your product in for service.
You can find contact information on our website at
www.treasureproducts.com > support > contact.
This limited warranty gives you specific legal rights,
and you may also have other rights which vary from
state to state.
• • •
© 2002-20
20
Treasure Products Inc.
All rights reserved. Made in USA.
Designed and manufactured by Treasure Products.
Vibra is a registered trademark of Treasure Products.
012020
A3
Important Notes
•
The detection field projected resembles a cone
shape, with the deepest depth of detection in the
center of the coil. The slower the sweep the
deeper the detection depth.
•
Raising the detectors coil up while in use will
start the turn-off sequence, indicated by a
blinking light. Lower the detectors coil within 3
seconds to continue detecting.
•
Unit will not detect when the light is blinking in
either the turn-on or turn-off sequence.
•
As with any new detector you should practice
with known targets to develop your searching
technique.
Helpful Hints
•
If you continue to hold the detector with the coil
up after turn on, then the detector will remain on
indefinitely in this vertical position. This feature
may be useful if searching with the detectors coil
in a vertical position is necessary.
•
You can secure the Vibra-Tector to your wrist
using the attached wrist strap. To adjust fit, press
down on the cord lock button and move it to the
desired location.
Product Care
•
Your Vibra-Tector 740 is a sensitive electronic
instrument. Although it is rugged, care in
transporting and handling will extend its life and
result in optimum performance.
•
When the Vibra-Tector is off there is no drain
on the battery. However, if stored for long
periods of time, we recommend that the battery
be removed to prevent damage to the detector
due to a potential battery leak.
•
If the detector has been exposed to salt water
always rinse with fresh water and check the
battery compartment for any leaks. If water has
entered the battery compartment carefully wipe
dry and leave open until completely dry.
Other Equipment by Treasure Products, Inc.
Vibra-Probe
-
Pinpointer Metal Detector
Vibra-Quatic
-
Pinpointer Metal Detector
E-Z Swing -
Metal Detector Harness
VIBRA-TECTOR 740 SPECIFICATIONS
•
Manufacturer:
Treasure Products
•
Model:
Vibra-Tector 740
•
Detection Type:
Pulse Induction
•
Search Mode:
All metal
•
Communication:
Vibration and Light
•
Tuning:
Automatic
•
Waterproof:
Up to 100 feet (30m)
•
Overall Length:
17 inches (43 cm)
•
Coil Diameter:
4 inch (10 cm)
•
Weight:
1 lb. (450 grams)
•
Power Source:
One standard 9-volt
•
Wrist Strap:
Included
•
9-volt Battery:
Included
•
Warranty Period:
1 year
•
Origin:
Made in the USA
Specifications and features are subject to
change without prior notification.
