FACEM SPA - TURIN (TO) ITALY
BONE SAW
P. 18 of 97
USER AND MAINTENANCE MANUAL 1.0
Training, information and training carried out
Definitions
Training
An educational process through which to transmit to workers and to other persons
involved in the corporate system of prevention and protection the knowledge and
procedures useful for the acquisition of skills for the safe performance of their respective
tasks within the company and for the identification, reduction and management of risks.
Information
A set of activities aimed at providing knowledge for the identification, reduction and
management of risks in the workplace.
Instruction
A set of activities to workers concerning the correct use of equipment, machinery, systems,
substances and devices, including personal protective equipment, and the relevant work
procedures.
We would point out to the Manager in charge of the department of the company where the
"BONE SAW" machine will be installed, before using the same the requirement to inform all
those who are involved in its operation of the conditions of its use and of the relevant
contraindications of use. The objectives of such action should be to implement a thorough
training and instruction program in order to obtain, from employees, use of the machine in
conditions of maximum safety. During training, it is advisable to carry out tests to determine
the level of learning.
The information relating to the use of the machine and the related risks are reported in this
manual.
The employer must ensure that the machine operator is trained before commencing work
and consequently authorised for its use.
This information is in this manual also enables obtaining of maximum performance from
the machine.
THE DEPARTMENT MANAGER, BEFORE AUTHORISING
USE OF THE MACHINE, MUST ENSURE THE PROVISION OF
INFORMATION,
TRAINING
AND
INSTRUCTION
EITHER
PERSONALLY OR DELEGATED TO A THIRD PARTY.
THE TRAINING MUST END WITH A TEST IN ORDER TO
DETERMINE THE DEGREE OF LEARNING OF THE MACHINE
OPERATOR.
The actions of information, training and instruction should be reported in the
attached table.
