1
TVM50A
TVM50A
0
5
10
0
5
10
0
5
10
0
5
10
0
5
10
0
5
10
0
5
10
Volume 1
Gain
Bass
Mid
Treble
Volume 2
Tone 1
Mic/ Inst.
Input 1
Input 2
Insrument
Phones
Power
On
Aux. Input
(Media)
Hi-Z
Lo-Z
MODEL TYPE: YS2002
A-TVM50A / 1v0
MADE IN CHINA
FABRIQUÉ EN CHINE
MANUFACTURED FOR YORKVILLE SOUND, CANADA
50/60 Hz
75 WATTS
100-240 VAC
CAUTION: REPLACE
WITH SAME TYPE
FUSE AND RATING
ATTENTION: UTILISER
UN FUSIBLE DE
RECHANGE DE MEME
TYPE ET CALIBRE
FUSE: T1.0A 250V
Traynor TVM50A Combo-Amplifier
General
The Traynor TVM50A is a 50-Watt, combo amplifier that answers the need for a portable, all-purpose sound system.
The TVM50A can be used practically anywhere with one or two microphones or instruments. The amp also features
RCA auxiliary input jacks. These may be used to connect an audio source such as a CD player, tape deck, MP3
player or even laptops using the appropriate audio adapters.
Control Panel
Input 1 Jack
This versatile input has been optimized to accept any
line level signal, low-impedance or high-impedance
microphones. The combi-connector accepts cables
with either XLR or ¼-inch TRS phone plugs.
Input 1 Volume (Mic/Inst.) Control
The Channel 1 volume control adjusts the level of the
audio signal connected to the Input 1 jack.
Input 2 Jack
A guitar, bass guitar, keyboard or microphone can be
connected to the TVM50A using this ¼-inch phone
jack. Always use a shielded cable. An instrument
(guitar, bass or keyboard) or a high impedance
microphone may be connected to the TVM50A using
this ¼-inch phone jack using a standard ¼-inch
shielded cable.
Input 2 Hi-Z Lo-Z Select Switch
Select Lo-Z when using low impedance microphones
or Hi-Z when using high impedance microphones or
musical instruments.
Input 2 Equalization
The TVM50A’s 3-band EQ adjusts the Bass, Mid and
Treble for input 2.
It is suggested that all tone controls be set to
the center position (12-O’clock prior to operation.
Adjustments can then be made to achieve the
desired tone. If feedback occurs while you are using a
microphone, try turning down the Treble until it stops.
Input 2 Volume
The Input 2 Volume control adjusts the level of the
signal connected to the Input 2 ¼-inch jack.
Aux. Input (Media)
The Aux. Input (Media) RCA jacks can be used to
connect a tape deck, CD player, MP3 player, drum
machine, computer or any line-level audio source.
Since the TVM50A is a mono amplifier, these jacks
sum the signals internally, mixing the incoming L and
R stereo signals into a mono signal. If the signal is
mono, (e.g. the monitor or aux. output from a mixer),
connect to either the L or R jack. Using a stereo
signal? Connect to both RCA jacks as usual, so that
both channels (L and R) are amplified.
All manuals and user guides at all-guides.com
