background image

STAMPEDE 4x4 VXL • 3

Traxxas
6200 Traxxas Way
McKinney, TX 75070
Phone:  972-549-3000
Toll-free 1-888-TRAXXAS

Internet
Traxxas.com
E-mail: [email protected]

Entire contents ©2014 Traxxas. 
Traxxas, Ready-To-Race, Ready-
To-Win, Stampede, Stampede 4x4 
VXL, Velineon, and ProGraphix 
are trademarks or registered 
trademarks of Traxxas. Other 
brand names and marks are 
the property of their respective 
holders and are used only for 
purposes of identification. No 
part of this manual may be 
reproduced or distributed in print 
or electronic media without the 
express written permission of 
Traxxas. Specifications are subject 
to change without notice.

BEFORE YOU PROCEED

1

Carefully read and follow all instructions in this and any 
accompanying materials to prevent serious damage to your  
model. Failure to follow these instructions will be considered  
abuse and/or neglect.

Before running your model, look over this entire manual and 
examine the model carefully. If for some reason you decide it is not 
what you wanted, then do not continue any further. 

Your hobby 

dealer absolutely cannot accept a model for return or exchange 
after it has been run.

Warnings, Helpful Hints, & Cross-References

Throughout this manual, you’ll notice warnings and helpful hints 
identified by the icons below. Be sure to read them!

An important warning about personal safety or avoiding
damage to your model and related components. 

Special advice from Traxxas to make things easier  
and more fun.

Refers you to a page with a related topic.

SUPPORT

If you have any questions about your model or its operation, call the 
Traxxas Technical Support line toll-free at: 

1-888-TRAXXAS (1-888-872-9927)

*

Technical support is available Monday through Friday from  
8:30am to 9:00pm central time. Technical assistance is also available 
at Traxxas.com/support. You may also e-mail customer support with 
your question at [email protected]. Join thousands of registered 
members in our online community at Traxxas.com.

Traxxas offers a full-service, on-site repair facility to handle any  
of your Traxxas service needs. Maintenance and replacement  
parts may be purchased directly from Traxxas by phone or online  
at BuyTraxxas.com. You can save time, along with shipping  
and handling costs, by purchasing replacement parts from your  
local dealer.

Do not hesitate to contact us with any of your product support needs. 
We want you to be thoroughly satisfied with your new model!

SAFETY PRECAUTIONS

All of us at Traxxas want you to safely enjoy your new model. 
Operate your model sensibly and with care, and it will be exciting, 
safe, and fun for you and those around you. Failure to operate your 
model in a safe and responsible manner may result in property 
damage and serious injury. The precautions outlined in this manual 
should be strictly followed to help ensure safe operation. You alone 
must see that the instructions are followed and the precautions are 
adhered to. 

Important Points to Remember

• Your model is not intended for use on public roads or congested  

areas where its operation can conflict with or disrupt pedestrian or 
vehicular traffic.

• Never, under any circumstances, operate the model in crowds of people. 

Your model is very fast and could cause injury if allowed to collide  
with anyone.

• Because your model is controlled by radio, it is subject to radio 

interference from many sources that are beyond your control. Since  
radio interference can cause momentary losses of radio control, always 
allow a safety margin in all directions around the model in order to 
prevent collisions. 

• The motor, battery, and speed control can become hot during use. Be 

careful to avoid getting burned.  

• Don’t operate your model at night, or anytime your line of sight to the 

model may be obstructed or impaired in any way.

• 

Most importantly, use good common sense at all times.

Batteries and Battery Charging

Your model uses rechargeable batteries that must be handled with care for 
safety and long battery life. Make sure to read and follow all instructions 
and precautions for charging and maintaining the batteries. It is your 
responsibility to charge and care for the battery packs properly. In addition 
to your battery and charger instructions, here are some more tips to keep 
in mind.
• Do not charge batteries inside of an automobile. Do not charge batteries 

while driving in an automobile. The charger is equipped with a long cord 
intended to allow the battery to be charged outside of an automobile 
when using the automobile’s auxiliary power socket. If the cord will not 
reach outside of the automobile, find another power source.

• Never charge batteries on wood, cloth, carpet or on any other  

flammable material.

• Do not operate the charger in a cluttered space, or place objects on top 

of the charger or battery.

*Toll-free support is available to U.S. residents only.

Содержание Stampede 4x4 VXL 67086-1



































Отзывы: