Slayer
•
5
Tools, Supplies and Required Equipment
Your Slayer comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to operate and maintain your model.
SUPPlIED ToolS AnD EQUIPMEnT
REQUIRED ToolS AnD EQUIPMEnT
(sold separately)
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
For more information on radio
system batteries, see
Use the
Right Batteries
on page 11.
TRAXXAS
Glow plug
wrench
1.5mm “L” wrench
2.0mm “T” wrench
2.5mm “T” wrench
8mm slipper clutch wrench
Shock wrench
Turnbuckle wrench
Suspension multi-tool
4-way wrench
Suspension tuning
shims and hollow balls
2.5mm “L” wrench
TRAXXAS
Extra oiled air filter set
(pre-filter and primary filter)
Air filter oil
Traxxas part #5263
12 AA alkaline batteries
Traxxas Top Fuel® Power Plus
™
see page 20
Small flat-blade screwdriver
for tuning (1/8 inch blade)
After-run oil to protect
the engine from corrosion
10% quart - #5010
20% quart - #5020
33% quart - #5030
10% gallon - #5060
20% gallon - #5070
33% gallon - #5080
NiCad or NiMH
7.2V battery pack
Fuel dispensing bottle
(Traxxas part #5001)
Antenna nut
wrench
NiCad or NiMH battery charger
Traxxas part #3030X shown
TRAXXAS
