SLASH VXL • 11
TRAXXAS TQ
i
RADIO & VELINEON POWER SYSTEM
ESC/Motor Wiring Diagram
Your model is equipped with the newest TQi 2.4GHz transmitter
with Traxxas Link
™
Model Memory. The transmitter has two
channels for controlling your throttle and steering. The receiver
inside the model has 5 output channels. Your model is equipped
with one servo and an electronic speed control.
MODEL WIRING DIAGRAM
to Motor
LED
EZ-Set Button
(On/Off Button)
Heat Sink
VXL-3s ELECTRONIC SPEED CONTROL
Traxxas High-Current
Connector (Male)
to Battery
Receiver cable
(RX wire)
Cooling Fan
Connector
(for optional use)
TRANSMITTER AND RECEIVER
Steering
Trim
Multi-Function
Knob
Throttle
Trigger
Throttle Neutral
Adjust
Steering Wheel
Power Switch
Battery Compartment
Set Button
Menu Button
Red/Green Status LED
see page 29 for more info
Link
Button
LED
Sensor Expansion
Port
**
Antenna
Receiver
Sound Control
Module
to Sound Control Module
Steering Servo
Channel 1
CH3 - Shift Channel
Green Connector
CH2 - ESC Signal Out
Gray Connector
CH1 - Steering Servo
to Sound Output
Modules on body
Brushless Motor
(see sidebar for proper
motor wiring)
Motor Cap
Traxxas High-Current
Connector (Male)
to Battery
Channel 2
Electronic Speed Control
** Accessory sensor port for use with the Telemetry Expander Module (see Traxxas.com and included materials for more information)
