Traxxas EZ-Peak Live iD 2971, Руководство пользователя

Страница: 23 / 28

EZ-PEAK LIVE • 23
Error Code
Explanation Solution
The detected battery
type does not match the
charger configuration.
a. Press the Battery iD Start/Stop button to return to charger configuration.
b. Verify that the battery matches the selected type (LiPo or NiMH).
c. Verify that the balance connector is plugged into the charger (if charging a non-iD LiPo
battery) or fully plugged into the charger (if charging an iD LiPo battery).
d. Inspect the battery for any signs of damage.
The battery or cell voltage
is too high or too low to
charge safely.
a. Verify that the balance connector is plugged into the charger (if charging a non-iD
LiPo battery).
b. Disconnect the battery and check its condition. Ensure it is within safe voltage levels.
c. Use the EZ-Peak Live App to verify charge settings.
The charge cycle
timed out without
reaching the target
battery voltage.
Disconnect the battery and check its condition.
The Traxxas battery iD
is detected but is not
readable by the charger
or the charger detected a
potential battery iD error.
Contact Traxxas Customer Support.
The internal charger
temperature is too high.
Power off the charger and allow it to cool before attempting to charge the battery again.
Charger Error Codes
If the charger detects an error during the charge process, the charge status LEDs will flash an error code.