background image

E-REVO BRUSHLESS • 3

BEFORE YOU PROCEED

Traxxas
6200 Traxxas Way
McKinney, Texas 75070
Phone: 972-549-3000
Toll-free 1-888-TRAXXAS

Internet
Traxxas.com
E-mail: [email protected]

Entire contents ©2014 Traxxas. 
Traxxas, Ready-To-Race, Ready-
To-Win, E-Revo and ProGraphix 
are trademarks or registered 
trademarks of Traxxas. Other 
brand names and marks are 
the property of their respective 
holders and are used only for 
purposes of identification. No 
part of this manual may be 
reproduced or distributed in print 
or electronic media without the 
express written permission of 
Traxxas. Specifications are subject 
to change without notice.

Carefully read and follow all instructions in this and any 
accompanying materials to prevent serious damage to your  
model. Failure to follow these instructions will be considered  
abuse and/or neglect.
Before running your model, look over this entire manual and examine 
the model carefully. If for some reason you decide it is not what 
you wanted, then do not continue any further. 

Your hobby dealer 

absolutely cannot accept a model for return or exchange after it 
has been run.

Warnings, Helpful Hints, & Cross-References

Throughout this manual, you’ll notice warnings and helpful hints 
identified by the icons below. Be sure to read them!

An important warning about personal safety or avoiding
damage to your model and related components. 

Special advice from Traxxas to make things easier  
and more fun.

Refers you to a page with a related topic.

SUPPORT

If you have any questions about your model or its operation, 
call the Traxxas Technical Support line toll-free at: 

1-888-TRAXXAS (1-888-872-9927)

*

Technical support is available Monday through Friday from 8:30am 
to 9:00pm central time. Technical assistance is also available at Traxxas.
com. You may also e-mail customer support with your question at 
[email protected]. Join thousands of registered members in our 
online community at Traxxas.com.
Traxxas offers a full-service, on-site repair facility to handle any  
of your Traxxas service needs. Maintenance and replacement  
parts may be purchased directly from Traxxas by phone or online  
at BuyTraxxas.com. You can save time, along with shipping  
and handling costs, by purchasing replacement parts from your  
local dealer.
Do not hesitate to contact us with any of your product support needs. 
We want you to be thoroughly satisfied with your new model!

SAFETY PRECAUTIONS

All of us at Traxxas want you to safely enjoy your new model. Operate your 
model sensibly and with care, and it will be exciting, safe, and fun for you and 
those around you. Failure to operate your model in a safe and responsible 
manner may result in property damage and serious injury. The precautions 
outlined in this manual should be strictly followed to help ensure safe 
operation. You alone must see that the instructions are followed and the 
precautions are adhered to.

Important Points to Remember

• Your model is not intended for use on public roads or congested areas where 

its operation can conflict with or disrupt pedestrian or vehicular traffic.

• Never, under any circumstances, operate the model in crowds of people. Your 

model is very fast and could cause injury if allowed to collide with anyone.

• Because your model is controlled by radio, it is subject to radio interference 

from many sources that are beyond your control. Since radio interference can 
cause momentary losses of radio control, always allow a safety margin in all 
directions around the model in order to prevent collisions.

• The motor, battery, and speed control can become hot during use. Be careful 

to avoid getting burned.

• Don’t operate your model at night, or anytime your line of sight to the model 

may be obstructed or impaired in any way.

• Most importantly, use good common sense at all times.

Batteries and Battery Charging

Your model uses rechargeable batteries that must be handled with care for 
safety and long battery life. Make sure to read and follow all instructions and 
precautions for charging and maintaining the batteries. It is your responsibility 
to charge and care for the battery packs properly. In addition to your battery 
and charger instructions, here are some more tips to keep in mind.
• Do not charge batteries inside of an automobile. Do not charge batteries 

while driving in an automobile. The charger is equipped with a long cord 
intended to allow the battery to be charged outside of an automobile when 
using the automobile’s auxiliary power socket. If the cord will not reach 
outside of the automobile, find another power source.

• Never charge batteries on wood, cloth, carpet or on any other flammable material.
• Do not operate the charger in a cluttered space, or place objects on top of the 

charger or battery.

• If a battery gets hot to the touch during the charging process (temperature 

greater than 140°F / 60°C), disconnect the battery from the charger and 
discontinue charging immediately.

• Always store battery packs safely out of the reach of children and pets.
• Do not short-circuit the battery pack. This may cause burns and severe 

damage to the battery pack and create the risk of fire.

• Do not expose the charger to water or moisture.
• Do not disassemble the charger.

*Toll-free support is available to U.S. residents only.

1

Содержание E REVO 56087-1





































Отзывы: