DCB M41 WIDEBODY • 9
QUICK START: GETTING UP TO SPEED
The following guide is an overview of the procedures for getting your model running. Look for the Quick Start logo on the bottom
corners of Quick Start pages.
1. Read the safety precautions on page 4
6. Check servo operation • See page 16
For your own safety, understand where carelessness and misuse
could lead to personal injury.
Make sure the steering servo is working correctly.
2. Charge the battery packs • See page 13
7. Range test the radio system • See page 16
Your model requires two battery packs and a compatible battery
charger (not included). Never use a NiMH or NiCad charger to
charge LiPo batteries.
Follow this procedure to make sure your radio system works
properly at a distance and that there is no interference.
3. Install batteries in the transmitter • See page 13
8. Drive your DCB M41 Widebody • See page 20
The transmitter requires 4 AA alkaline batteries (sold separately).
Driving tips and adjustments for your DCB M41 Widebody.
4. Install battery packs in the model • See page 14
9. Maintaining your DCB M41 Widebody • See page 25
Your model requires two full charged battery packs (not included).
Follow these critical steps to maintain the performance of
your DCB M41 Widebody and keep it in excellent running
condition.
5. Turn on the radio system • See page 15
Make a habit of turning the transmitter on first, and off last.
The Quick Start Guide is
not intended to replace the
full operating instructions
available in this manual.
Please read this entire
manual for complete
instructions on the proper
use and maintenance of
your model.
Look for the Quick Start
logo at the bottom of
Quick Start pages.
