background image

DCB M41 WIDEBODY • 3

BEFORE YOU PROCEED

Carefully read and follow all instructions in this and any 
accompanying materials to prevent serious damage to your  
model. Failure to follow these instructions will be considered  
abuse and/or neglect.

Before running your model, look over this entire manual and 
examine the model carefully. If for some reason you decide it is not 
what you wanted, then do not continue any further. 

Your hobby 

dealer absolutely cannot accept a model for return or exchange 
after it has been run.

Warnings, Helpful Hints, & Cross-References

Throughout this manual, you’ll notice warnings and helpful hints 
identified by the icons below. Be sure to read them!

An important warning about personal safety or avoiding
damage to your model and related components. 

Special advice from Traxxas to make things easier  
and more fun.

Refers you to a page with a related topic.

SUPPORT

If you have any questions about your model or its operation, 
call the Traxxas Technical Support line toll-free at: 

1-888-TRAXXAS (1-888-872-9927)

*

Technical support is available Monday through Friday from 8:30am 
to 9:00pm central time. Technical assistance is also available at 
Traxxas.com. You may also e-mail customer support with your 
question at [email protected]. Join thousands of registered 
members in our online community at Traxxas.com.

Traxxas offers a full-service, on-site repair facility to handle any  
of your Traxxas service needs. Maintenance and replacement  
parts may be purchased directly from Traxxas by phone or online  
at BuyTraxxas.com. You can save time, along with shipping  
and handling costs, by purchasing replacement parts from your  
local dealer.

Do not hesitate to contact us with any of your product support needs. 
We want you to be thoroughly satisfied with your new model!

SAFETY PRECAUTIONS

All of us at Traxxas want you to safely enjoy your new model. 
Operate your model sensibly and with care, and it will be exciting, 
safe, and fun for you and those around you. Failure to operate your 
model in a safe and responsible manner may result in property 
damage and serious injury. The precautions outlined in this manual 
should be strictly followed to help ensure safe operation. You alone 
must see that the instructions are followed and the precautions are 
adhered to.

Important Points to Remember

WARNING: Cutting Hazard. The propeller is extremely sharp and 
spins at high speed. To avoid cuts or other severe injury, keep 
fingers clear of the propeller whenever batteries are connected. 
Remove or keep loose articles of clothing and long hair away from 
the propeller when handling and running the boat. 

• 

CAUTION: Watch out for hot 

parts.

 Battery connectors, 

wires, and even batteries can 
become very hot after the 
DCB M41 Widebody is run 
very aggressively at peak 
performance levels. Remove the hatch and allow these items to 
cool for about 2 minutes before handling. Excessive heat and short 
run time (less than 3 minutes on a pair of 3-cell 5000mAh LiPo 
batteries) are indicators that your driving style is too aggressive for 
the conditions. You may experience severe component damage 
and greatly increased wear in the driveline. In this case, you may 
see what appears to be smoke inside the hatch when you remove 
it, but it is a combination of steam and outgassing from the wire 
insulation due to heat. If you are not experiencing about 4+ 
minutes of run time, then adjust your driving style to be smoother 
and less aggressive. 

• Always follow local laws and ordinances with respect to running RC 

boats. Observe water safety rules and regulations.

• Never, under any circumstances, operate your model in any 

water where people are swimming or wading. Your model is fast 
and could cause injury if allowed to collide with anyone. Respect 
wildlife; avoid running in areas reserved for water fowl!

• Do not drive your model at night.

Traxxas
6250 Traxxas Way
McKinney, Texas 75070
Phone: 972-549-3000
Toll-free 1-888-TRAXXAS

Internet
Traxxas.com
E-mail: [email protected]

Entire contents ©2016 Traxxas. 
Traxxas, Ready-To-Race, and 
Ready-To-Win are trademarks or 
registered trademarks of Traxxas. 
Other brand names and marks are 
the property of their respective 
holders and are used only for 
purposes of identification. No part 
of this manual may be reproduced 
or distributed in print or electronic 
media without the express 
written permission of Traxxas. 
Specifications are subject to change 
without notice.

*Toll-free support is available to U.S. residents only.

1

Copyright © 2016 Dave’s Custom Boats, LLC,  
All rights reserved. The trademarks DCB and 
M41 Widebody are the exclusive property of 
Dave’s Custom Boats and used under license.  

dcbperformanceboats.com

Содержание 57046-4



































Отзывы: