background image

2

WARNING!

Carefully read and follow all instructions in this and any accompanying 
materials to prevent serious damage to your model. Failure to follow 
these instructions will be considered abuse and/or neglect. 

Introduction 

Thank you for purchasing the Traxxas Nitro Stampede. This 
manual contains the instructions you will need to operate and 
maintain your Nitro Stampede. 

Look over the manual and examine 

the Nitro Stampede carefully before running it.

 If for some reason 

you think the Nitro Stampede is not what you wanted, then do not 
continue any further. 

Your hobby dealer absolutely cannot accept 

a Nitro Stampede for return or exchange after it has been run.

   

Please read 

ALL

 of the operating instructions and precautions 

before attempting to drive the Nitro Stampede. Even if you are 
an experienced R/C enthusiast, continue reading to learn about 
Nitro Stampede’s unique features. Pay special attention to the 
mechanical and safety precautions outlined in the manual.             
If you have any questions about your model, or its operation, call 
the Traxxas Technical Support Line toll-free at 1-888-TRAXXAS 
(1-888-872-9927); outside the U.S., call +1-972-549-3000. 
Technical support is available Monday through Friday, from 
8:30am to 9:00pm Central Standard Time. Technical assistance is 
also available through our website at Traxxas.com (e-mail us at 
[email protected]). We hope that you will enjoy many hours 
of fun with your new Nitro Stampede.

Fuel 

It’s imperative that you use the correct fuel in your Pro.15 engine for 
maximum performance and engine life. Traxxas Top Fuel

®

 Power Plus

 

should be used to ensure correct engine lubrication, 
performance, and ease of tuning.

• Top Fuel is the only fuel that is 100% certified  

for use in Traxxas engines. 

• Traxxas Top Fuel is made with just the right balance 

of natural and synthetic lubricants to allow excellent 
throttle response and the best top-end performance, 
without sacrificing long-term durability. 

You may use 10% or 20% nitro-content fuel. Try to 
use the same percentage all the time. Avoid switching 
back and forth between fuels. We recommend that if you break in 
your engine on 20% fuel that you stick with that percentage. If you do 
move to a higher or lower percentage, make sure you readjust your 
fuel mixture to compensate.

Can other brands of fuel be used besides Top Fuel?

 There are 

other fuels that can provide satisfactory performance; however, 
there could be long-term costs in the form of decreased engine 
performance, loss of tuning ease, and shorter engine life. Only use 
fuels that contain both castor and synthetic oil.

Everyone has an opinion or a claim to make about fuel. The 
engineering team at Traxxas has spent years developing Traxxas 
engines. No one knows more about the specific fuel requirements of 
Traxxas engines than Traxxas engineers. We strongly urge you not to 
take chances with your engine investment and use the Traxxas fuel 
made for Traxxas engines. 

PERSONAL SAFETY PRECAUTIONS

 Every precaution outlined in this manual needs to be followed to help ensure safe operation. 
Operate your model sensibly and with care and it will be exciting, safe, and fun for you and 
your spectators. Failure to operate your model in a safe and responsible manner could result 
in property damage and serious injury. You alone must see to it that the instructions are 
followed and the precautions are adhered to. 

The Nitro Stampede is not intended for use by children without the supervision of a responsible 
adult.

 Traxxas shall not be liable for any loss or damages, whether direct, indirect, special, 

incidental, or consequential, arising from the use, misuse, or abuse of this product and any 
chemical or accessory required to operate this product.
Important Points to Remember

•   Nitro Stampede is very fast! Children under 16 years of age and inexperienced drivers 

should not operate the Nitro Stampede without the supervision of a responsible and 
knowledgeable (experienced) adult.

• 

Model engine fuel is dangerous and highly poisonous.

 Always follow all directions and 

precautions printed on the fuel container. Model engine fuel is poisonous to humans and 
animals. Drinking the fuel can cause blindness and death. Handle with care and respect.

•   Model engine fuel, especially when in a fuel dispensing bottle, may look like a cool drink to 

a child. 

Keep all fuel out of the reach of children at all times. Do not place fuel containers 

on the ground where children can reach them while you are driving.

•   Model engine fuel is flammable. Never allow smoking, sparks, heat, or flame in the presence 

of fuel or fuel vapors.

•   The engine, brakes, and exhaust system may become extremely hot during use. Be careful 

not to touch these parts, especially when refueling or stopping the engine.

•  Prolonged exposure to the engine exhaust can be harmful. Avoid breathing the engine 

exhaust. Always run your Nitro Stampede outdoors, in a well-ventilated area. Never run the 
engine indoors.

•   Do not operate your Nitro Stampede at night or anytime your line of sight to the model 

may be obstructed or impaired in any way.

•   Never operate your Nitro Stampede in crowds of people or busy pedestrian areas. Nitro 

Stampede is very fast and could cause injury to those unaware of its presence. Keep small 
children at a safe distance away from the operating area.

•   Because Nitro Stampede is controlled by radio, it is subject to radio interference from many 

sources beyond your control. Since radio interference can cause momentary loss of control, 
always allow a safety margin in all directions around your model to prevent collisions.

•   The engine can be loud. If the noise makes you uncomfortable, wear ear protection. Be 

considerate of your neighbors by not running your model early in the morning or late in 
the evening.

•   Do not kink the antenna wire. Kinks in the antenna wire will reduce range.
•   Do not cut the antenna “stinger” or any other 

part of the antenna wire. Cutting the antenna will 
reduce range.

•   You must extend the antenna wire in the model 

as far as possible for maximum range. In doing so, 
the antenna wire will be extended outside of the 
vehicle body. Do not wrap or coil the antenna wire 
to keep it from extending out of the body.

•   Do not allow the antenna wire to extend outside the body without the protection of an 

antenna tube, or the antenna wire may incur crash damage that could reduce range.

•  

Most importantly, use good common sense at all times. 

Batteries and Battery Charging

Your model uses rechargeable batteries that must be handled with care for safety and long 
battery life. Make sure to read and follow all instructions and precautions that were provided 
with the battery packs and your charger. It is your responsibility to charge and care for the 
battery packs properly. In addition to your battery and charger instructions, here are some 
more tips to keep in mind.
•   Use the supplied charger to charge the included battery. See “Charging the EZ-Start 

Battery” on page 6.

•   Do not charge batteries inside of an automobile. Do not charge batteries while driving in an 

automobile. The charger is equipped with a long cord intended to allow the battery to be 
charged outside of an automobile when using the automobile’s auxiliary power socket. If 
the cord will not reach outside of the automobile, find another power source.

•   Never leave batteries to charge unattended.
•   Allow the battery pack to cool off before charging.
•   Do not use battery packs that have been damaged in any way. Do not use battery packs 

that have damaged wiring, exposed wiring, or a damaged connector as this may create the 
risk of fire.

•   Children should have responsible adult supervision when charging and handling batteries.
•   Never charge batteries on wood, cloth, carpet or on any other flammable material.
•   Do not operate the charger in a cluttered space, or place objects on top of the charger or 

battery.

•   If a battery gets hot to the touch during the charging process (temperature greater 

than 140°F / 60°C), disconnect the battery from the charger and discontinue charging 
immediately.

•   Always store battery packs safely out of the reach of children and pets.
•   Do not expose the charger to water or moisture.
•   Do not disassemble the charger.
•   Only use approved chargers for Nickel Metal Hydride (NiMH) battery packs. Do not exceed 

the maximum charge rate of 2 amps.

•   Do not short-circuit the battery pack. This may cause burns and severe damage to the 

battery pack.

•   Do not burn or puncture the batteries. Toxic materials could be released. If eye or skin 

contact occurs, flush with water.

•   Store the battery pack in a dry location, away from heat sources and direct sunlight.
•   NiMH batteries must be recycled or disposed of properly.

Recycling Your Traxxas Power Cell NiMH Battery

Traxxas strongly encourages you to recycle your Power Cell NiMH battery when it has reached 
the end of its useful life. 

Do not throw your battery in the trash. 

All Power Cell NiMH battery 

packs display the RBRC (Rechargeable Battery Recycling Corporation) icon, indicating they 
are recyclable. To find a recycling center near you, ask your local hobby dealer or visit www.
call2recycle.org.

Correct

No

No

No

No

Содержание 41096-3

















Отзывы: