background image

TR A X X AS 

 3

BEFORE YOU PROCEED

Carefully read and follow all instructions in this and any 
accompanying materials to prevent serious damage to your  
model. Failure to follow these instructions will be considered  
abuse and/or neglect.

Before running your model, look over this entire manual and 
examine the model carefully. If for some reason you decide it is not 
what you wanted, then do not continue any further. 

Your hobby 

dealer absolutely cannot accept a model for return or exchange 
after it has been run.

WARNINGS, HELPFUL HINTS, & CROSS-REFERENCES

Throughout this manual, you’ll notice warnings and helpful hints 
identified by the icons below. Be sure to read them!

An important warning about personal safety or avoiding
damage to your model and related components. 

Special advice from Traxxas to make things easier  
and more fun.

Refers you to a page with a related topic.

SUPPORT

If you have any questions about your model or its operation, 
call the Traxxas Technical Support line toll-free at: 

1-888-TRAXXAS (1-888-872-9927)

*

Technical support is available Monday through Friday from 8:30am 
to 9:00pm central time. Technical assistance is also available at 
Traxxas.com. You may also e-mail customer support with your 
question at [email protected]. Join thousands of registered 
members in our online community at Traxxas.com.

Traxxas offers a full-service, on-site repair facility to handle any  
of your Traxxas service needs. Maintenance and replacement  
parts may be purchased directly from Traxxas by phone or online  
at BuyTraxxas.com. You can save time, along with shipping  
and handling costs, by purchasing replacement parts from your  
local dealer.

Do not hesitate to contact us with any of your product support needs. 
We want you to be thoroughly satisfied with your new model!

Traxxas
1100 Klein Road
Plano, Texas 75074
Phone: 972-265-8000
Toll-free 1-888-TRAXXAS

Traxxas U.K.
P.O. Box 1128
Winterbourne, Bristol 
BS36-2SH
England
Phone: 44-117-956-1002

Internet
Traxxas.com
E-mail: [email protected]

Entire contents ©2009 Traxxas. 
Traxxas, Ready-To-Race, Ready-
To-Win, Titan, Velineon, 1/16 
Slash VXL 4WD, 1/16 E-Revo VXL 
and ProGraphix are trademarks 
or registered trademarks of 
Traxxas. Other brand names and 
marks are the property of their 
respective holders and are used 
only for purposes of identification. 
No part of this manual may be 
reproduced or distributed in print 
or electronic media without the 
express written permission of 
Traxxas. Specifications are subject 
to change without notice.

*Toll-free support is available to U.S. residents only.

Содержание 1/16 E Revo 7105

































Отзывы: