manualshive.com logo in svg

TRAXX P8000, Руководство по эксплуатации

Поделиться
Скачать
TRAXX P8000 Скачать руководство пользователя страница 11

R16 High Frequency Ring Saw & P8000 Power Converter 

 Operations Manual  |  10

Inspect the blade before use. It must not be cracked, warped or damaged in any way that would cause a hazard 
in operation. Loose diamond segments can be ejected at high speed, causing possible injury. Always check 
that the diamond segments are not under cut. If the diamond segments are thinner or nearly thinner than the 
blade core, the kerf will be too tight fitting and could easily lead to kickback.  
Inspect the blades for segment damage, arbor hole damage or any other damage which could cause hazardous 
operation.

SPLASH GUARDS

The spring-loaded splash guards are useful to help contain slurry which splashes toward the back. The upper 
guard has an over-center spring which will lock into the fully open position if it is pulled all the way back. The 
lower guard has a clip which can be used to lock the guard in the fully open position.

WATER CONNECTION 

Water is a basic requirement for this tool and is essential for cooling 
of the motor and converter.  The water  also serves as a coolant 
to avoid the working surface of the diamond segments from 
overheating. Water also keeps down dust and flushes away abrasive 
particles.

The converter has 2 water connections. Connect the water supply to 
either connection on the converter first and then connect the other connection to the motor using the water 
coupling hose. 

CAUTION: NEVER OPERATE THIS TOOL WITHOUT WATER FLOW THROUGH BOTH THE CONVERTER AND 
THE MOTOR.  

It is designed to be water cooled and would quickly overheat without water.

WARNING: Check all connections of the water feed system to ensure there  are no leaks. Inspect hoses 
and other critical parts which could deteriorate.

WARNING: The maximum water pressure should not exceed 70 psi (4 bar).

  

Note: Use a wet vacuum to collect cooling water if nearby objects 
could be damaged by water.  

WATER FEED VALVE

The water flow is controlled by the water feed valve. The water to the 
blade may be finely adjusted to the required amount.

Inlet  Connection

Open

Closed

Water Feed 

Valve

Содержание P8000


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды