www.traxontechnologies.com
©2022 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
02/22 V1.3
6 of 23
2. INSTALLATION
2.1 Points To Consider
Plan your installation before mounting the Media Tubes
®
HO. The following should be
considered for a successful installation.
•
Weather conditions and ambient temperature of installation site.
•
Appropriate cable lengths (cable gauges described in below diagram). Please consult your
local Traxon office or authorized agent for necessary aid.
•
The number of Media Tubes
®
HO and appropriate LED Engines.
•
DMX512/e:pix controller to be used to control the Media Tubes
®
HO.
•
Distance between each Tube for thermal expansion and maintaining pixel pitch.
•
There are two mounting methods to consider, plan mounting distances accordingly for
whichever method is required.
•
Proper surge protection.
•
Number of standard LED Engines to be used.
FIG.4: Media Tube
®
HO Cable System
CABLE A
CABLE B
CABLE C
CABLE D
AWG0~6
AWG24
Power: AWG17
Ø7.2mm/0.28”
Data: AWG24
Power: AWG17
Ø7.2mm/0.28”
Data: AWG24
Cable A = Live power cable
(from PSU to Power Distribution Block)
Cable B = Data cable
(from VMC to Terminal Block)
Cable C = Starter cable
(From Terminal Block to first Media Tube
®
HO
in chain)
Cable D = Interconnection cable
(From Media Tube
®
HO to another Media
Tube
®
HO)
