www.traxontechnologies.com
©2021 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
06/21 V0.3
6 of 13
2. INSTALLATION
2.1 Points To Consider
Plan your installation before mounting any luminaires. The following should be considered for
a successful installation.
•
Weather conditions and ambient temperature of installation site.
•
Appropriate cable lengths
•
Adequate space for better heat dissipation (150mm apart) of LED Engines
•
Check Mounting Guide to plan for mounting details.
•
The length of the Media Pixel Ribbon DMX and appropriate DMX Controllers and LED
Engines.
•
Controller to be used to control the Media Pixel Ribbon DMX.
2.2 Pre-Installation Checks
2.2.1
Installation Checklist
1. Prepare cables and all necessary accessories.
2. Perform functional check of the Media Pixel Ribbon DMX.
3. Ensure the DATA OUT connector on the Media Pixel Ribbon DMX are covered by the
Waterproof End Cap after testing. Keep Waterproof End Caps safe for reuse.
4. Ensure all pre-installation checks laid out below have been followed.
5. Mount the Media Pixel Ribbon DMX. If the installation is to be left uncompleted overnight,
place all non-connected Media Pixel Ribbon DMX, Connection Cables, DMX Controller
and LED Engines in an indoor environment.
Ensure all the Media Pixel Ribbon DMX, Connection Cables, DMX Controller and LED Engines
are initially stored in a dry area to guarantee the complete sealing of the system from water
before installation.
