Traxon Allegro Dot M/L Diffused View Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 23

Traxon Allegro Dot M/L Diffused View Скачать руководство пользователя страница 13

www.traxontechnologies.com

©2019 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U.
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Installation Guide

12/19 V2.0

13 of 23

To prematurely end the length of a string of Dots, the optional Field-Cut End Cap should
be used with DOW CORNING 7091 Silicone Sealant applied on open-ended cable. This
should be done at least 1-2 days at Room Condition (Temperature: 22°C & Relative Humidity:
50%RH) before on-site installation to allow curing of silicone.

FIG.13: Field-Cut Sealing Procedures

Terminate cable with a straight
cut. Apply and fill 7091 silicone (not
included) on open-ended cable
(make the glue is about 1mm higher
than the height of the cable).

1

Insert the flat cable with glue
into the bottom of the silicone
sleeve.

2

3

Clean excess silicone from end
cap.

The end edge of the silicone
sleeve should rest against the
inner bottom of the end cover.

4

Fix the flat cable waterproof end
cover with screws (M3*6.0mm), and
electric screwdriver torque required
0.5-0.6N.m.

5

6

Place on flat surface for the cure

time recommended by 7091

silicone’s instruction.

«
...
11
12
13
14
15
...
»

Содержание Allegro Dot M/L Diffused View
























Отзывы:

Нет отзывов