manualshive.com logo in svg

Traxon AL MT LT DW 1000 1QPXL CR CE, Руководство по установке

Поделиться
Скачать
Traxon AL MT LT DW 1000 1QPXL CR CE Скачать руководство пользователя страница 9

www.traxontechnologies.com

©2021 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. 
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Installation Guide

IG????EN V1.0 11/21 

9 of 21

2.2.3  

Installation Sequence

1.  Measure the correct distances for brackets and install the Allegro Media Tube

®

 Lite fixtures.

2.  Connect the Allegro Media Tube

®

 Lite in the daisy-chain manner outlined in the System 

Diagram to form large installations.

3.  Perform functional check on all the Allegro Media Tube

®

 Lite and inspect cables and 

brackets for any damage. Check for any abnormalities with the control signal.

4.  Report any functional defect found to your nearest Traxon Technologies office. DO NOT 

attempt to install the Allegro Media Tube

®

 Lite with functional defects on-site.

2.3  On-Site Installation

• 

DO NOT attempt installation in wet or severe weather conditions.

• 

DO NOT leave and expose any  Allegro Media Tube

®

 Lite or LED Engines 

unconnected under wet/raining or snowing environment.

• 

IP failure induced by stressed/damaged cables during or after installation 

will not be under warranty by Traxon Technologies.

• 

ALWAYS keep the cables protected from sharp objects and ensure no 

damage is generated on the cable.

Failure to keep  Allegro Media Tube

®

 Lite within the operating temperature range of –40°C 

to +50°C / –40°F to +122°F  and storage temperature range of –40°C to +70°C / –40°F to 
+158°F will void the product’s warranty.

2.3.1  

On-Site Installation

1.  Fix brackets to installation surface with anchor bolts or screws.
2.  The Allegro Media Tube

®

 Lite are interconnected using the IN and OUT cables/

connectors on each end of the tube. Connectors will make an audible “click” when 
connected. Gently pull on the cables in opposites directions to ensure they are fulled 
locked and do not come loose. Below diagram shows the Tube connections. Always 
remember to affix an Quick Lock Waterproof End Cap (sold separately) for the OUT 
connector of the final Tube in each daisy chain. See System Diagram for details.

FIG.7:   Allegro Media Tube

®

 Lite Connections

Starter Cable

End Cap

 

Содержание AL MT LT DW 1000 1QPXL CR CE






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды