manualshive.com logo in svg

Traxon AL MT LT DW 1000 1QPXL CR CE, Руководство по установке

Поделиться
Скачать
Traxon AL MT LT DW 1000 1QPXL CR CE Скачать руководство пользователя страница 8

www.traxontechnologies.com

©2021 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. 
PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Installation Guide

IG????EN V1.0 11/21 

8 of 21

2.2  Pre-Installation Checks

2.2.1  

Installation Checklist

1.  Prepare cables and all necessary accessories (Waterproof Quick Lock End Caps etc).
2.  Perform functional check of the Allegro Media Tube

®

 Lite. Take care not to damage 

cables/connectors during pre-installation checks.

3.  Ensure all pre-installation checks laid out below have been followed.
4.  Mount the Allegro Media Tube

®

 Lite on-site. If the installation is to be left uncompleted 

overnight, place all non-connected LED Engines and the Allegro Media Tube

®

 Lite in an 

indoor environment.

Ensure all the Interconnection Cables,  Allegro Media Tube

®

 Lite and LED Engines are initially 

stored in a dry area to guarantee the complete sealing of the system from water before 
installation.

2.2.2  

Mounting Bracket

5mm screws with spring washers and washers are needed to fix the mounting bracket. The 
mounting brackets can be moved and the bracket distances are recommended values.

FIG.6:  Mounting Bracket

Spring washer and 
washer (not included)

5mm stainless steel screw 
(not included) 

Stainless steel screw 
(Included) 

Содержание AL MT LT DW 1000 1QPXL CR CE






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды