Usage
TraXion Engineered Products | ProGear Line
Safety First
Only move the Topside Tool Tray when the tray is at it’s lowest altitude.
ALWAYS lock both Rear Casters before using the Tray or changing its
altitude.
To lower the Tray you must flip the Lever away from the Ratchet Gears.
Once you do this it is very important that you maintain control of the
handle. Failure to control the Ratchet Handle could result in the rapid
descent of the Tray. This could result in damaged vehicles, equipment as
well as injury or even death.
Along these same lines, NEVER lower the Tray altitude if anybody or
anything is near or beneath the tray.
NEVER allow children to play with the ProGear Topside Tool Tray. Don’t
even let them near it.
The tension knob provides improved Tray stability once the tray is at
desired altitude. It is only a secondary stability device. Do NOT rely on
the Tension Knob to maintain Tray altitude. The Ratchet Lever must
always be fully engaged with the Ratchet Gears when in use.
Instructions v1 | 3-750