Assembly
TraXion Engineered Products | ProGear Line
2
Instructions v1 | 3-750
2
Bolt the Ratchet onto the Riser
Tube and attach Webbing to the
Slider as shown.
Webbing
Bolt
Sleeve
Nut
Ratchet
Start with bottom hole. Insert
bolt through ratchet and then
through corresponding hole in
Riser Tube. Thread nut from
inside Riser Tube. Repeat for
top bolt and nut. Insert Plastic
Cap into top of Riser Tube.
Run Sleeve through webbing
and locate between the holes in
the Slider. Insert bolt through
Slider holes and the sleeve and
tighten Lock Nut to secure.
Slider
8mm x 70mm Bolt with
Sleeve and Lock Nut
8mm x 15mm Bolts,
Lock Nuts and
Plastic Cap
