22
Operating Your Appliance
© Travis Industries
100-01282
4150526
Starting a Fire
Use of the optional GreenStart igniter will greatly simplify this process. See page 41.
Since the dawn of time man has debated the best way to start a fire. Some use the boy-scout "tee-pee"; some
prefer the "tic-tac-toe" stack. Either way, review the hints and warnings below to ensure proper fire starting.
Make sure the air control is pulled out. If additional air is needed, open the door 1/4" during the first
five minutes of startup.
Make sure the bypass is pulled out.
Do not use colored paper or any material other than newspaper and cord wood to start a fire.
This may damage the catalytic combustor.
Never
use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to start
or "freshen up" a fire in this stove. Keep all such liquids well away from the stove while it is in use.
DO NOT USE CHEMICALS OR FLUIDS TO START THE FIRE. DO NOT BURN GARBAGE OR
FLAMMABLE FLUIDS SUCH AS GASOLINE, NAPHTHA OR ENGINE OIL. Do not place such fuel
within space heater installation clearances or within the space required for charging and ash removal.
If using a fire-starter, use only products specifically designed for stoves - follow the manufacturer's
instructions carefully.
HOT WHILE IN OPERATION. KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT
MAY CAUSE SKIN BURNS.
Do not open the ash pan when the stove is lit. An extreme fire hazard will result.
If the smoke does not pass up the chimney, ball up one sheet of newspaper, place it in the center of the
firebox and light it. This should start the chimney drafting (this eliminates "cold air blockage").
Use plenty of kindling to ensure the stove reaches a proper temperature. Once the kindling is burning
rapidly, place a few larger pieces of wood onto the fire.
