Travis Industries DVL GSR2 NB Скачать руководство пользователя страница 42

42 

Limited 7 Year Warranty 

© Travis Industries 

4140813 

100-01294 

Register your TRAVIS INDUSTRIES, INC. Limited 7 Year Warranty online at 

traviswarranty.com

, or complete the enclosed Warranty card and mail it within 

ten (10)

 

days of the appliance purchase date to: TRAVIS INDUSTRIES, INC., 12521 Harbour Reach Drive, Mukilteo, WA  98275.  TRAVIS INDUSTRIES, INC. warrants this 
gas appliance (appliance is defined as the equipment manufactured by Travis Industries, Inc.) to be defect-free in material and workmanship to the original purchaser 
from the date of purchase as follows: 

Check with your dealer in advance for any costs to you when arranging a warranty call.   

Mileage or service charges are not covered by this warranty. This charge can vary from store to store. 

Component 

Years 1 & 2 

Parts & Labor 

Years 3 Through 5 

Parts & Labor 

Years 6 & 7 

Parts Only 

Burner Assembly 

Burner Pan Assembly, Air Shutter Assembly, Main Burner Orifice 

 

 

 

Electrical Assembly (within heater structure): 

Wiring harness, snap discs, rheostat speed control, blowers, etc.

 

 

 

 

Gas Control Assembly 

Adjustable control valve, fireplace controller, pilot assembly and pilot wiring 

 

 

Glass 

Glass (breakage from thermal shock) 

 

 

Media 

Log Set, Embers, Stones, Crushed Glass 

 

 

Gold, Nickel & Copper Plating 

Face & Door (see “Conditions and Exclusions” # 9)

 

 

 

Accessories 

Firebacks, Power Heat Ducts, Andirons, etc… 

 

 

 

One-Way Freight Allowance 

One-way freight allowance on pre-authorized repair done at factory is covered.

 

 

 

Convection Heat Exchanger 

Convection heat exchanger assembly

 

 

 

Firebox Assembly 

Adjustable Air Restrictor, Pressure Relief Mechanisms, Glass Attachment Mechanism

 

 

 

 

EXCLUDED COMPONENTS: 

Paint, Gasketing, and Accent Light Bulbs 

CONDITIONS & EXCLUSIONS 

1.  This new gas appliance must be installed by a qualified gas appliance technician.  It must be installed, operated, and maintained at all times in accordance with the instructions in the Owner’s 

Manual.  Any alteration, willful abuse, accident, neglect, or misuse of the product shall nullify this warranty. 

2.  This warranty is nontransferable, and is made to the ORIGINAL purchaser, provided that the purchase was made through an authorized TRAVIS dealer. 
3.  Discoloration and some minor expansion, contraction, or movement of certain parts and resulting noise, is normal and not a defect and, therefore, not covered under warranty.  The installer must ensure the 

appliance is burning as per the rating tag at the time of installation.  Over-firing (operation above the listed BTU rate) of this appliance can cause serious damage and will nullify this warranty.  

4.  The warranty, as outlined within this document, does not apply to the chimney components or other Non-Travis accessories used in conjunction with the installation of this product. If in doubt as to 

the extent of this warranty, contact your authorized TRAVIS retailer before installation.   

5.  Travis Industries will not be responsible for inadequate performance caused by environmental conditions such as nearby trees, buildings, roof tops, wind, hills or mountains or negative pressure or 

other influences from mechanical systems such as furnaces, fans, clothes dryers, etc. 

6.  This Warranty is void if: 
a.  The unit has been operated in atmospheres contaminated by chlorine, fluorine or other damaging chemicals. 
b.  The unit is subject to submersion in water or prolonged periods of dampness or condensation. 
c.  Any damage to the unit, combustion chamber, heat exchanger or other components due to water, or weather damage which is the result of, but not limited to, improper chimney/venting installation. 
7.  Exclusions to this 7 Year Warranty include:  injury, loss of use, damage, failure to function due to accident, negligence, misuse, improper installation, alteration or adjustment of the manufacturer's 

settings of components, lack of proper and regular maintenance, damage incurred while the appliance is in transit, alteration, or act of God. 

8.  This 7 Year warranty excludes damage caused by normal wear and tear, such as paint discoloration or chipping, worn or torn gasketing, corroded or cracked logs, embers, etc.  Also excluded is 

damage to the unit caused by abuse, improper installation, modification of the unit, drilling of the orifices, or the use of fuel other than  that for which the unit is configured.  Units are shipped for 
natural gas and must be converted to propane using the included conversion kit.  Confirm fuel configuration with your installer.   

9.  Damage to gold or nickel surfaces caused by fingerprints, scratches, melted items , or other external sources left on the gold or nickel  from the use of cleaners other than denatured alcohol  is not 

covered in this warranty. 

10. TRAVIS INDUSTRIES, INC. is free of liability for any damages caused by the appliance, as well as inconvenience expenses and materials.  Incidental or consequential damages are not covered by 

this warranty.  In some states, the exclusion of incidental or consequential damage may not apply. 

11. This warranty does not cover any loss or damage incurred by the use or removal of any component or apparatus to or from the gas appliance without the express written permission of TRAVIS 

INDUSTRIES, INC.  and bearing a TRAVIS INDUSTRIES, INC. label of approval. 

12. Any statement or representation of TRAVIS products and their performance contained in TRAVIS advertising, packaging literature, or printed material is not part of this 7 year warranty. 
13. This warranty is automatically voided if the appliance’s serial number has been removed or altered in any way. If the appliance is used for commercial purposes, it is excluded from this warranty. 
14. No dealer, distributor, or similar person has the authority to represent or warrant TRAVIS products beyond the terms contained within this warranty.  TRAVIS INDUSTRIES, INC. assumes no liability 

for such warranties or representations. 

15. Travis Industries will not cover the cost of the removal or re-installation of hearths, facing, mantels, venting or other components. 
16. If for any reason any section of this warranty is declared invalid, the balance of the warranty remains in effect and all other clauses shall remain in effect. 
17. THIS 7 YEAR WARRANTY IS THE ONLY WARRANTY SUPPLIED BY TRAVIS INDUSTRIES, INC., THE MANUFACTURER OF THE  APPLIANCE.  ALL OTHER WARRANTIES, WHETHER 

EXPRESS OR IMPLIED, ARE HEREBY EXPRESSLY DISCLAIMED AND PURCHASER’S RECOURSE IS EXPRESSLY LIMITED TO THE WARRANTIES SET FORTH HEREIN. 

IF WARRANTY SERVICE IS NEEDED: 

1.  If you discover a problem that you believe is covered by this warranty, you MUST REPORT it to your TRAVIS dealer WITHIN 30 DAYS, giving them proof of purchase, the purchase date, and the 

model name and serial number. 

2.  Travis Industries has the option of either repairing or replacing the defective component.  
3.  If your dealer is unable to repair your appliance’s defect, he may process a warranty claim through TRAVIS INDUSTRIES, INC., including the name of the dealership where you purchased the 

appliance, a copy of your receipt showing the date of the appliance’s purchase, and the serial number on your appliance.  At that time, you may be asked to ship your appliance, freight charges 
prepaid, to TRAVIS INDUSTRIES, INC.  TRAVIS INDUSTRIES, INC., at its option, will repair or replace, free of charge, your TRAVIS appliance if it is found to be defective in material or 
workmanship within the time frame stated within this 7 year warranty.  TRAVIS INDUSTRIES, INC. will return your appliance, freight charges (years 1 to 5) prepaid by TRAVIS INDUSTRIES, INC., to 
your regional distributor, or dealership. 

4.  Check with your dealer in advance for any costs to you when arranging a warranty call.  Mileage or service charges are not covered by this warranty. This charge can vary from store to store. 

Содержание DVL GSR2 NB















































Отзывы: