87
Helpline No. UK/Northern Ireland 00800-78772368 Rep . Ireland 00800-78772368
Web Support www.Traveler-service.com/uk
Model Number:DC-XZ6
Symptom
Even if I press the shutter
button, the camera does
not shoot.
Images do not appear on
the LCD monitor.
Although it is set to auto
focus, it does not focus.
The flash does not fire.
The flash cannot recharge.
Even though the flash fired,
the image is dark.
The image is dark.
Cause
The battery is running low.
The power is not on.
The camera is not in shooting mode.
The shutter button is not pressed all
the way down.
The memory card does not have any
free capacity.
End of memory card life.
The flash is charging.
The memory card is not recognised
by the camera.
The auto power off function is activated.
The memory card is write-protected.
The power is not on.
LCD monitor is dark.
The lens is dirty.
The distance to the subject is smaller
than the effective range.
The flash is set to flash off.
The distance to the subject is greater
than flash effective range.
The flash is too soft.
The image is captured in a dark place
while set to flash off.
It is under-exposed.
The flash is too soft.
Solution
Recharge the battery.
Turn the power on.
Slide the mode switch to shooting mode.
Press the shutter button all the way
down.
Insert a new memory card, or delete
unwanted files.
Insert a new memory card.
Wait until the status LED off.
Format the memory card in this camera
before its first use or when it was used
other than this camera.
Turn the power on again.
Remove the write-protection.
Turn the power on.
Adjust the brightness of the LCD
monitor in the menu.
Wipe clean with a soft, dry cloth or
lens paper.
Get your subject within the effective
focus range.
Turn the flash on.
Get closer to your subject and shoot.
Adjust the flash offset.
Use a different setting instead of
flash off mode.
Set the exposure compensation to a
higher value.
Adjust the flash offset.
Shooting
Frequently Asked Questions
1 2
