TRAUMA F/X EMITT-ASL, Руководство пользователя

Страница: 16 / 54

G E T T I N G S T A R T E D
11
The EMITT-ASL and TSR Transmitter batteries are consumable items (with a one
(1) year manufacturer’s warranty). As with most batteries, Makita batteries have a
finite shelf life. After considerable use, a ‘used’ battery’s capacity will drop to a point
that it will no longer be able to hold a charge.
The EMITT-ASL contains a low voltage disconnect feature that will automatically
shut the unit off when battery voltage drops to a certain level. If the EMITT-ASL
stops operating, remove and recharge the battery or replace with a fully charged
battery.
Recharging the EMITT-ASL and TSR Transmitter Batteries
1. Plug the Makita quick charger (Figure 4)
into a standard 110V wall outlet.
2. Slide the battery onto the quick charger
until firmly in place and the indicator light
illuminates
(each battery takes
approximately 30-45 minutes to charge,
and depending on the amount of usage,
provides up to 6-8 hours of training
support).
3. Remove the battery when readout indicates
charging is complete.
NOTE:
A 220V Makita charger is available for International use. This is a special-
order item and available for purchase through TraumaFX by contacting customer
support or your account representative.
General Use and Care of Batteries
All batteries used in TraumaFX products were specially selected to provide optimal
operational performance. However, as with all batteries, they will last longer with
proper care and maintenance. To preserve the life of the batteries, the following best
practices are recommended:
1. Only use the batteries and charger(s) provided by TraumaFX; use of
different equipment may result in damage to the batteries and/or the
TraumaFX unit(s).
2. Remove all batteries from the EMITT-ASL or TSR Transmitter at the end
of each training session. Batteries should never be stored inside a unit
(EMITT-ASL or TSR Transmitter)
3. Recharge batteries immediately after use by placing them in the Makita
battery charger.
Figure 4