ANT B
ANT A
ADU1 ADU2
To Channels 9-12
MULTI-CHANNEL CONFIGURATION WITH S4000ADU
1.
MULTICHANNEL OPERATION OF THE S4.16.
The S4.16 is designed for simultaneous use of several systems.
a. Ensure each system is assigned a different operating channel. The
channels are adjusted as per the illustrations on page 4 & 6. It is important
that each Transmitter/Receiver combination has its own unique channel
numbered 1-16.
b. Try to ensure that each Transmitter is separated by 0.5m (1.5 feet) during
operation.
It is recommended that for systems with 4 or more channels the
Trantec
Antenna Distribution Amplifier S4000ADU
is used together with the
S4.16
Rackmount kit, this allows the use of only 1 set of antennas to feed several
receivers which are then fixed onto 19” 1U rack trays in multiples of 2. Each
ADU
is capable of driving 4 units simultaneously with a separate output for
additional
S4000ADU
units. Below is a typical 8 channel installation. Each
S4000ADU
comes complete with all necessary connecting leads for 4
channels.
Note
: The Transmitter only changes Active Channel when turned
off
and
then
on
again.
9
S4.16 ARTWORK_final_1 colour 20/10/06 08:27 Page 13
