16
6.4 Functions Adjustable for Operating Environment
6.4.1 Channel Scan
This function checks for idle channels that are free of interference.
From “Top Menu 6 Utility”, press the Right key the Up or Down keys to go to “Utility Menu 1
Channel Scan”. Press the Right key to show the screen below. Select the group to be
scanned using Up or Down keys, then press the Set key.
Press the Up or Down key to turn the function on. Pressing the Set key with ON displayed
begins scanning for idle channels.
Usable idle channels are displayed after completion of channel scanning. Press the Left
key to navigate back up the menu structure.
6.4.2 RF Interference Check
Turn off the transmitter showing the problem and set the Channel Identity of the module
unit receiving the signal to OFF.
From “Top Menu 6 Utility”, press the Right key and the Up or Down keys to go to “2 Ch
Identity”. Press the Right key to show the screen below. Navigate to the required unit with
Left or Right keys and turn the Channel Identity off using Up or Down keys.
If the front panel RF bar graph LEDs light, this indicates interference in the frequency set
for the corresponding unit. In such cases, change to another frequency free of interference.
P
U
R O
C H
S
T
L
G
E
E C
G
2
[
]
R
C
N
S
A
P
C H
G
P
R
]
[
O N
C
N
S
A
*
2
1
3
C H
0
4
2
V
T
C
A
A N
8
5
7
B
9
G
2
R
F
P
]
[
*
U 2
U 1
O F
F
O N
*
C H I
D
