Transvideo CineMonitorHD10 SB Evolution, Руководство оператора

Страница: 13 / 48

Operator Manual Rev 2.0 Page 13
O
PERATION
Sart-Up & Power
The ON/OFF Switch is on the back of the monitor.
The product needs a certain time to reach its nominal brightness.
This time can vary with the temperature.
When using the optional Battery Holder, the switch of the battery holder overpasses the
switch of the monitor.
In OFF position, the power consumption is null.
WARNING RISK OF FIRE:
It is always recommended to remove the power source from the monitor when you do
not use it and/or when you travel. Especially if you place the monitor in a closed
environment (bag, box, …).
Using the direct functions
Several direct functions are available from the keypad (chapter "I
NTRODUCTION
" section
"Product Overview")
One short press on a key gives access to the function.
One long press (more than 2 seconds) on a key gives access to the sub functions of the
related function (if any). Pressing F1…F4 enables to adjust those sub functions.
Using the sub functions F1…F4
Sub function keypad (F1…F4) is used to adjust optional functionalities of a direct function
(if any).
Depending of the function, options and environment, the content of F1…F4 may differ.
Pressing a key will activate or deactivate the sub function. An activated sub function is
highlighted by an orange text while an inactivated function prompts in white.
In some specific case, F4 may extend the selection to a second page of sub menu.