GB
The shelf is optimised for storing traditional Bordeaux type bottles.
Configuration of a shelf in sliding layout:
To install bottles on a sliding shelf, carry out the following:
- Insert the shelf in the desired place.
- Place a wooden locking pin in each of the 2 holes located on the right
and left of the upper face, approximately 4cm to the rear of the shelf:
when you slide the shelf forwards, these pins prevent the shelf from
completely sliding out of the cabinet (see diagram).
- Pull the shelves towards you until they stop.
- Start by placing the bottles in the rear row recesses, with the base of
the bottles towards the back.
- Continue with the front row, placing the bottles in the opposite
direction.
- A sliding shelf can only hold a single row of bottles (a
maximum of 8 traditional Bordeaux type bottles).
- In the case of a mixed layout, in order to achieve optimal
accessibility, it is recommended that you position the sliding
shelves in the central section of the appliance.
Never pull out more than one loaded sliding shelf at a time.
Additional shelves can be purchased from your retailer.
Please note that if the number of bottles you own is not sufficient to fill
your wine cabinet, it is preferable to share the load over all of the
available shelves, and avoid loads of the type “all at the top” or “all at
the bottom”.
- Continue stacking the bottles
ensuring that none of the bottles
touches the back wall.
- A storage shelf can hold a maximum of 3 rows of 8 bottles, or 24
traditional Bordeaux type bottles (31 kg).
English - P9
