TransTel Communications TDS 600 Series, Руководство пользователя

Страница: 8 / 24

Issue 1.0 June 2003
Description: Call Park provides the capability for a single line
telephone to "stow", or “park” a call so that the single
line telephone can operate without consideration of
the parked call.
Place a call into a park slot (orbit):
1. Establish a call (either incoming or outgoing).
2. Press hookswitch. The call is on Hold.
3. Dial [8], [5], plus the parking slot (0-9) where you wish to place
the call.
4. If the slot is available, you will continue to hear a confirmation
tone. If the slot is in use, you will hear busy tone. You may
immediately dial another slot number (0-9) in order to find a free
parking slot. When an available slot is found, you will hear the
confirmation tone, indicating that the call is parked.
To retrieve a call from a Call Park slot:
From any telephone:
1. Lift Handset.
3. Dial [8], [5], plus the parking slot (0-9) where the call is parked.
4. You will be connected to the call. If the Call Park slot is empty,
you will hear a busy tone.
From the telephone that parked the call:
1. Lift Handset .
2. Dial [8], [5] plus the parking slot (0-9) where you previously
parked the call. You will be connected to the call.
3. If the call has been retrieved by another station you will receive
busy tone.
Note: To park more than one call at a time “call split” must be
disabled.
Call Park
4