TransTel Communications TDS 600 Series, Руководство пользователя

Страница: 11 / 24

Description: If you have outside line access, you may access one
of the available lines.
1. Lift Handset.
2. Dial [9].
3a. If there is a CO line available, you will be connected to it and will
hear CO dial tone.
3b. If there is no CO line available, you will hear a busy signal. You
may hang up and try again later or set a CO callback. For more
information, see CO Line Queuing in this document.
Centrex/PABX Flash
Description: Centrex/PABX Flash allows a single line telephone
user to send a Flash to a Central Office line. This is
particularly useful when special services are in effect,
or when the TDS 600 system is connected behind
Centrex or behind a PABX. This allows you to
transfer calls that may be on your Centrex or PABX,
but not on the TDS system.
1. Establish the telephone call.
2. Press hookswitch. The caller is on hold.
3. Dial [8], [0], [0], or the assigned access code.
4. The system will present a timed flash to the CO.
5. You will be re-connected to the CO line. You may dial digits as is
required to perform the Centrex or PABX function.
(Direct) CO Line Access
Description: You may access individual CO lines on the system by
directly dialing them. This is especially convenient if
your system is equipped with special purpose lines.
1. Lift Handset .
2. Dial [8], plus the three digit line number that you want to access.
3. If the line is not in use and you are allowed access to the line, you
will be connected to the line and you will hear CO dial tone.
CO Line Group Access
7