Monitor Components
In order to get the best effect and protect your monitor,please use the right
battery and special power adaptor which complies with US safety standard.
CAUTION
CAUTION
Do not use new and used batteries together.
Do not use different types of batteries together.
Do not dispose the batteries in fire. Batteries may explode or leak.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
List
1.Blood Pressure Monitor
(TMB-995-BT)
4.User manual
2.Cuff
(Type BF applied part)
(22cm~42cm)
3. 4×AA batteries
(Please use TRANSTEK
authorized cuff. The size
of the actual cuff please
refer to the label on the
attached cuff.)
Component list of
pressure measuring system
1 Cuff
2 Air pipe
3 PCBA
4 Pump
5 Valve
AIR HOSE
AIR CONNECTOR PLUG
LCD DISPLAY
START/STOP
5. AC Adaptor
(KH0601000UW
)
CUFF
The Choice of Power Supply
1
.Battery powered mode:
6VDC 4*AA batteries
2
.AC adaptor powered mode:
6V 1A
(Can be supplied by AC adaptor model
KH0601000UW
!)
Right picture is the hole in for power
adaptor.
BATTERY COMPARTMENT
1
.
Slide off the battery cover.
2
.
Install the batteries by matching
the correct polarity, as shown.
3
.
Replace the cover.
Installing and Replacing the Batteries
Replace the batteries whenever the below happen
The shows
The display dims
The display does not light up
9
8
INTRODUCTION
BEFORE YOU START
